Chain elevator
Chain elevator
Elevators chain ladle men are used for vertical transportation powdery and bulk the melkokuskovykh of materials (the piece size - up to 100 mm).
Chain elevators find application in construction, metallurgical, mining, chemical, woodworking and some other industries.
The indispensable condition to the transported materials - chemical not aggression (resistance to chemical environments), bulk density isn't higher than 2,5 t/m3 and temperature to 150 degrees Celsius. Chain elevators establish in the shop or as intershop transport (in the open air this equipment can be used if freight isn't subject to hardening).
LLC Holunitsa makes the chain elevators having productivity of 5 - 100 cubic meters per hour. Chain elevators have the closed traction element, rigid fastening of ladles, in the lower part the tension drum, in top – asterisks or a driving drum is located.
The drive of a chain elevator is supplied with a stop to avoid the return movement of ladles during a stop under loading.
The drive complete with reducers of type 1Ts2U (Izhevsk, JSC Reduktor), the 4MTs2S motor reducers (Pskov, JSC PZMP), the motor reducers of "DanfossBAUER", "NORD", "BONFIGLILI", etc.
Elevators complete with sensors a subtime material, the sensor of speed and break of a tape (LLC PROMRADAR, Moscow, "IFM", Germany).
Our organization makes the following standard sizes of elevators:
Production of elevators from stainless steel is possible.
Elevator type |
CO-250М |
CS-320М |
CS-400М |
The transported freight |
Loose dust-like, granular, melkokuskovy and srednekuskovy dry or small humidity freights with a bulk density of 0,8 … 2,0 t/m3 |
||
Chain type |
Lamellar |
||
Width of a ladle, mm |
250 |
320 |
400 |
Step of ladles, mm |
200 |
250 |
320 |
Speed of the movement of ladles, m/s |
0,63 |
0,54 |
0,54 |
Capacity of a ladle, l |
2,0 |
6,4 |
14 |
Productivity, m3/h |
25,0 |
50,0 |
80,0 |
Max. height of an elevator, m |
33,5 |
30,7 |
37,8 |